Turnkey Pre-Terminated Drop Cable + Patch Cord Kit—Install in Days, Not Weeks.

TL;DR: Stop flying splicers to every drop. Our turnkey kit pre-terminates G.657.A2 Drop Cable and LC/SC Patch Cords in-factory—your crews install in days, not weeks, with no fusion splicer on the critical path.

The kit: four layers, one PO, zero interface risk

We don't sell you a cable—we hand your project a Turnkey Cabling Solution where one source factory owns every interface. That removes the three classic failure modes of multi-brand buying: ferrule-precision mismatch, polarity conflicts, and fiber-parameter drift.

• L1 — Drop Cable: self-supporting / armored G.657.A2, 7.5 mm bend radius, the 80% last-mile workhorse.
• L2 — Patch Cord: LC/SC UPC/APC, the physical landing point of >80% of ports.
• L3 — OS2 / G.652.D Single-Mode Trunk: ≤0.35 dB/km @1550 nm backbone, pre-terminated reel-to-reel.
• L4 — MPO: conditional only—we add it solely on explicit high-density data-center builds. Today's edge/ISP scope runs on L1–L3.

Layer-by-layer: what we actually ship

• Pre-terminated Drop Cable: G.657.A2/B3 bend-insensitive fiber, factory-terminated SC/APC or LC/UPC, for aerial self-support and indoor stealth runs.
• Armored pre-terminated cable: stainless spiral armor, ≥3× crush resistance, 15-year outdoor life vs 2–3 years for plain jacket—built for direct-burial, conduit, and rodent routes.
• LSZH / OFNP Patch Cord: full LC/SC/FC/ST range, single-mode IL ≤0.30 dB, APC RL ≥60 dB, ≥1000 mating cycles, low-smoke zero-halogen jacket.
• OS2 trunk: tested to IEC 60794, UL OFNR/OFNP available for North America.

Factory QC that removes the splicer from your risk register

This is the trust anchor. Because termination happens in our plant, not your trench, every defect is caught before it ships.

• Outdoor cable proof: every Drop Cable batch passes −40~+85 °C thermal cycling and tensile/crush testing (self-support 500–600 N, armored ≥3× crush) per IEC 60794.
• Patch cord proof: each Patch Cord is insertion-cycled to ≥1000 mates and sleeved in flame-retardant LSZH / OFNP jacket verified to NEC Article 770.
• Six-stage protocol: incoming inspection → bi-directional OTDR → 100% IL + RL test with per-piece report → ISO 7 cleanroom termination → thermal-cycle re-verification → batch traceability. A red-line jumper (>0.70 dB) never leaves the line.

Deploy it in your environment

Our engineering team specs the jacket to your climate, not a generic one.

• Desert (Middle East): MDPE anti-UV outer + CITRA/TDRA filing, validated to 65 °C and IP66 enclosures.
• Tropical / rodent (Latin America): armored Drop Cable against humidity and gnawing; LSZH indoor tails.
• Cold-climate: enhanced tensile rating and −40 °C low-temp flexibility for aerial winter pulls.

Schedule & TCO: field splicing vs our pre-terminated kit

FAQ

"Will pre-terminated drops hold up in our outdoor plant?"
Yes. Our armored Drop Cable clears −40~+85 °C cycling and ≥3× crush; desert builds use MDPE anti-UV + CITRA filing.

"How fast can you ship custom lengths?"
Stock ships in 48 hours; custom lengths in 7 days (industry is 10). Small trial batches welcome before volume POs.

"Are the patch cords really data-center grade?"
Each meets IEC 61753 / TIA-568: IL ≤0.30 dB, APC RL ≥60 dB, ≥1000 cycles, LSZH/OFNP—verified per piece, not per batch.